Woman at home with dog

Knowing What Makes Windows Energy Efficient Can Save You Money

Published on

When it comes to creating energy efficiency in your home, it’s easy to forget the impact your windows have on your energy use. Drafty windows are easy to diagnose, but you don’t have to have a noticeable issue with your windows to benefit from replacement windows. The proper windows can help you save money when it comes to heating and cooling your home.

Thanks to improved technologies, the glass in your windows can increase energy efficiency. And that doesn’t just mean tinting your windows. Multiple-pane alternatives, various kinds of glazing, gas fills and even the method used to install the glass can help you save money on your energy bills any season, regardless of the weather.

Get to Know the ENERGY STAR® Basics
When selecting windows for energy efficiency, it's important to first investigage their energy-performance ratings in relation to the North Carolina climate and your home's design. What does “energy efficiency” even mean and how can you contrast the energy savings of one window against another once they’re in your home?

ENERGY STAR is the government agency that provides consumers with a reliable source for energy efficiency information about products. When buying an energy-efficient window, read the ENERGY STAR label. It will highlight a number of the factors that go into classifying performance. Here’s a list what these categories mean:

  • U-Factor: The rate of heat loss to the outside. A low U-factor is better.
  • Solar Heat Gain Coefficient (SHGC): Usually indicated as a fraction, this is the amount of solar radiation that a window lets in. SHGC is measured on a scale from 0 to 1. Window SHGC typically ranges from 0.25 to 0.80. Again, a low number is better.
  • Air Leakage (AL): The rate at which air passes through the joints in the window. The lower the AL value, the less air leakage.
  • Visible Transmittance (VT): The amount of light the window lets through measured on a scale of 0 to 1, with values generally ranging from 0.20 to 0.80. The higher the VT, the more light you see.
  • Condensation Resistance Factor (CRF): How tightly the window resists water buildup on a scale from 0 to 100. The higher the CRF, the better the window will guard against condensation.

Make sure to seek scores based on whole-unit numbers as opposed to center-of-glass numbers (COG). Whole-unit numbers are more reliable indicators of the window’s overall performance, while COG may not be as consistently reliable in areas of the window farther away from the center.

More Panes, Less Pain
Energy efficiency is improved in windows with more panes of glass in them. Double-pane windows are a popular choice for homeowners looking to improve energy efficiency with replacement windows.

While they can cost more, triple-pane windows can offer an even greater energy efficiency that is worth the money. Adding a middle pane means greater protection against the elements and allows the inner pane of the window to stay nearer to room temperature. A third pane also reduces any convection currents and drafts that could make a room colder.

Beyond improving energy efficiency, triple-pane windows also provide greater protection against loud noises and break-in damage than double-paned replacement windows. So, if you have rambunctious neighbors or live on a crowded street, you might benefit from triple-pane windows.

More Than Just Tinting
The glazing on your window can make a big impact in reducing both the SHGC and VT that goes into ENERGY STAR ratings. For years, people have used tinted glazing to absorb sunlight and reduce glare. Two other options can help on both sides of the glass and increase energy efficiency in your home.

On windows with two or more panes of glass, insulated glazing is created when the glass panes are spaced apart and hermetically sealed, leaving an insulating air space. Insulated window glazing primarily lowers the U-factor, but it also improves the SHGC.

Low-e coating can also have an impact on energy efficiency. A microscopically thin, nearly invisible metal or metallic oxide layer deposited directly on the surface of one or more of the panes of glass, low-e coating helps lower the window’s U-factor and can decrese energy loss by as much as 30 to 50 percent.

Insulating with Gas
Increasingly common today, gas-filled windows are made of at least two panes of glass with either argon or krypton gas filling the space between them. This gas adds another invisible barrier against the heat and cold that would impact a window’s U-factor or leakage rate.

Argon and krypton are non-toxic, naturally-occurring gasses found in the air we breathe. Factory-sealing the gas between the window’s glazing layers reduces the possibility of leakage or condensation buildup on the interior and exterior of your windows.

Edge Spacers Seal Out Leaks
The next factor that helps improve your window’s energy efficiency is the edge spacer. Edge spacers serve a number of functions. They:

  • Bear the stress the window faces with expansion and contraction during times of heat and cold.
  • Create a moisture barrier to prevent water or vapor condensation.
  • Provide a gas-tight defense that prevents the loss of any gas in low-e windows.

Windows are available in single-seal or double-seal systems. Aluminum seals are most common due to the material’s strong energy-conducting traits.

Single-seal systems include an organic sealant applied behind the spacers that holds the unit together and restrains moisture leakage. A double-seal system includes a secondary backing sealant, often silicon, to further defend against leaks. Double-seal systems are most often used in low-e windows to make certain to prevent any of the sealed gasses from escaping.

There’s a lot of science that goes into creating an energy-efficient replacement window. But, by reviewing the basics of what goes into the ENERGY STAR rating and understanding the differences in window glass options, you can discover windows that will make your home cozy and save you money at the same time.

Learn more about energy efficiency in your windows by chatting with our pros at Pella of North Carolina. Call 866-539-4196 or stop by our showroom. You can also schedule an appointment online for a free, in-home consultation.